Available driver types

The block-oriented simulation system BORIS enables the linkage to real processes via different kinds of hardware drivers. It has to be seperated between two types of hardware:

• PC-internal cards which have direct access to the PC-bus. These cards are especially recommended for time critical problems.
• External hardware modules which communicate with the PC via e. g. the serial RS232- or the parallel interface or USB or Ethernet. This group includes also SPS and bus driven modules.
• Automation systems
• Other drivers…

WAGO Kontakttechnik GmbH & Co. KG is a German company that manufactures components for electrical connections and electronic components for decentralized automation. The company is especially well known for its cage clamp and push-wire connector products, particularly the 280 Series and the 273 Series (often referred to as 'WAGO Cage Clamps'). The “WAGO I/O Field” app is for monitoring and full operation of the WAGO I/O System Field. This app allows you to display device information for both fieldbus modules and IO-Link hubs, make settings and adjust all device parameters. The communication this requires takes place through the Bluetooth® interface of the mobile device once Data Matrix has been scanned to select the device. 787-738 - WAGO Kontakttechnik GmbH. WAGO Kontakttechnik GmbH 787-738 Specialized Power ICs and Modules. Video Transcript. WAGO Kontakttechnik GmbH.

Please consider that all technical data listed below are based upon specifications given by the concerning distributors and are without liability. The list is updated permanently; so if your type of hardware is not yet included, just call us!

The prices for the drivers depend on the hardware as well as on the number of users. Drivers for modules marked by can be downloaded free of charge from the download area. Please refer to our price lists for current prices of all products!

Drivers for PC-internal cards / USB modules

On request we program drivers for other cards / modules!

Drivers for external modules

We offer ready-to-use drivers for the following hardware modules:

Drivers for modules marked by can be downloaded free of charge from either the German or the English download area.

Drivers for automation systems and PLC

Driver for CAN-Bus

For the CAN-Bus which is especially popular in the automotive industry a BORIS driver is available, at first for the large range of PC-CAN interfaces from the PEAK-System company in Darmstadt. The driver enables the comfortable signal configuration and the reading and writing of any signals. Our video (German) demonstrates the use of the driver in conjunction with the PCAN-MicroMod Evaluation Kit from PEAK-System.

Drivers Wago Kontakttechnik Gmbh & Co. Kg Port Devices Inc

Drivers for CONRAD digital multimeters

For the digital multimeters MS 9160, 3850 M, 3860 M, 4660 M, GDM 704/705, ME-22, ME-32, ME-42, VC 635, VC 655, VC 350, 4660 A, VC 820 and VC 840 of the company CONRAD-Elektronik low priced BORIS-drivers are available which allow measurement data acquisition, visualization and processing without any programming. Up to four multimeters (depending on the number of COM-ports of the PC) can be operated simultaneously. Details of the multimeters you find on the website of CONRAD-Elektronik.

Drivers Wago Kontakttechnik Gmbh & Co. Kg Port Devices List

Videos

Media in category 'WAGO Kontakttechnik GmbH & Co. KG'

Drivers Wago Kontakttechnik Gmbh & Co. Kg Port Devices For Sale

The following 32 files are in this category, out of 32 total.

• Automate industriel WAGO pour un système de monitoring en industrie pharmaceutique.jpg4,912 × 3,264; 7.89 MB
  
• Disassembled WAGO222 terminal.JPG3,648 × 2,736; 3.59 MB
  
• External junction box with Wago 222 terminals.JPG7,300 × 8,200; 10.54 MB
  
• Junction box anatomy.jpg1,350 × 900; 279 KB
  
• Junction box for wikipedia.JPG3,780 × 1,560; 1.07 MB
  
• Kitchen air extractor after wires join in junction box.JPG640 × 480; 107 KB
  
• Lasdop.jpg2,280 × 1,235; 207 KB
  
• Minden WAGO.jpg1,500 × 2,000; 762 KB
  
• Solderable terminals WAGO.jpg7,300 × 5,480; 6.4 MB
  
• Spring Clamp - Push Wire Lighting Connector (WAGO 224).jpg835 × 1,220; 450 KB
  
• Spring Clamp Connectors (WAGO Series 222).jpg1,101 × 1,796; 660 KB
  
• WAGO 221 splicing connector.png922 × 818; 1.08 MB
  
• WAGO 221 terminals.JPG3,648 × 2,736; 4.67 MB
  
• Wago 221-413 splicing connector with stranded wire.jpg5,263 × 3,509; 1.21 MB
  
• WAGO 222 terminals.JPG3,648 × 2,432; 3.18 MB
  
• WAGO 224 terminals for chandelier.JPG3,648 × 2,736; 3.3 MB
  
• WAGO 224 terminals for halogen lamps.JPG3,648 × 2,736; 3.4 MB
  
• WAGO 2273-200C.JPG3,648 × 2,736; 3.42 MB
  
• Wago geschlossen.jpg984 × 606; 67 KB
  
• Wago innen.jpg1,000 × 385; 119 KB
  
• WAGO Logo.svg512 × 185; 1 KB
  
• Wago offen.jpg515 × 385; 82 KB
  
• WAGO self-locking 4 wires.JPG3,648 × 2,736; 3.45 MB
  
• WAGO self-locking terminals 6 wires.JPG3,648 × 2,736; 3.48 MB
  
• WAGO self-locking.JPG7,300 × 5,480; 6.51 MB
  
• Wago TopJob s1.jpg2,000 × 2,369; 506 KB
  
• Wago TopJob s2.jpg2,000 × 1,993; 456 KB
  
• Wago TopJob s3.jpg1,355 × 2,000; 248 KB
  
• Wago TopJob s4.jpg2,000 × 1,847; 319 KB
  
• Wago-logo.png1,291 × 466; 87 KB
  
• Wagos.jpg4,160 × 3,088; 2.56 MB
  
• Wiring LIVAL chandelier.JPG3,264 × 2,448; 2.9 MB